HomeMachinery & Lab EquipmentFlourGRAPAS Innovation Awards 2018

GRAPAS Innovation Awards 2018

Don"t miss several of the companies with nominations for the GRAPAS Innovation Awards 2018 present their products at the one-day GRAPAS Conference being held in the conference rooms above the exhibition at the BITEC on March 27, 2018.

The conference starts at 09:30 and is free to attend. Please pre-register either at https://victamasia.com/registration if you are attending the exhibition or at www.bit.ly/grapas if you wish to attend the conference alone.

Please find the programme here: http://conta.cc/2Fh7wnK

Innovations galore at GRAPAS

The finalists for the 2018 GRAPAS Innovation Awards

This year sees an impressive round up of companies competing for the coveted GRAPAS Innovations Award 2018. For the first time Victam has opened the award to all companies in the milling sector serving the flour, rice and grain processing and handling sectors.

Innovations submitted must be a:

• Milling technology development (for flour, rice or other cereal)

• Production process or refinement that makes for more efficient and/or safe production of food

• Service (online or otherwise) that helps millers achieve their goals more efficiently

To participate a nomination must be an innovation, process or service and comply with the following:

• Have been introduced to the market after January 2016

• Be new

• Make a contribution to efficiency and/or safety

• Demonstrate significant practical value

• Applications can be made by both exhibitors and non-exhibitors

This year we have received a number of entries that have been reduced to nine finalists. A panel of four experts from around the world have evaluated the nominations and their results will be announced at the Victam Exhibition being held in Bangkok, Thailand from March 27-29, 2018.

To find out more visit

bit.ly/GRAPASinnovation

the grapas award for innovation 2018

The Bühler TUBEX MSDN-L

Accurate weighing of raw materials and product at every point in the manufacturing and processing chain is essential for efficient and cost-optimised production in the food and feed industry. TUBEX MSDN-L is a high-capacity hopper scale for accurately weighing a wide range of materials through the entire process, from raw material to finished product.

Launched in June 2017, Tubex is not just the first fully electric hopper scale; it is also the first completely closed scale. The electromechanical drive of the TUBEX hopper scale not only reduces energy costs; it also enables considerably more precise motion and position control. State-of-the-art Super-Caps provide the basis for intelligent energy management.

 

The Geelen Counterflow Electrical Dryer

The Geelen Counterflow Electrical Dryer will be launched at Victam Asia 2018. It recovers energy and water from the dryer exhaust and uses an electrical heat pump to boost back up the temperature of the drying air. The results: 1) Net reduction of energy consumption for drying of up to 65 percent; 2) Recovery of water of up to 65percent; 3) Significant reduction of odour load of exhaust air; 4) Reduction of CO2 footprint of potentially up to 99 percent.

As dryers are the number one consumers of energy in any petfood or aquafeed extrusion line, the Electrical Dryer will have a very significant impact on the energy intensity and CO2 footprint of the industry. Payback times depend on the ratio of gas to electricity prices per kWh. Optionally an Electrical/Gas Hybrid version with heatpump and gas burners enables optimisation of the drying process dependent on fluctuating prices for electricity and gas.

In markets where the share of renewable electricity is growing, spot prices for electricity tend to fluctuate with the availability of wind and solar power. The Electrical/Gas Hybrid dryer will then run on 100 percent electricity when there is a lot of low cost renewable electricity on the grid, and switch back (partially or fully) to natural gas when electricity prices are high.

 

Satake Pikasen FMS2000-F optical sorter

Satake presents the next generation Pikasen FMS2000-F optical. The Sorter works similar to the human eye and identifies colour differences by combining all the visible wavelengths. New digital image processing and automatic sensitivity creation functions give the added benefit of minimal operator training by utilizing an intuitive full colour user interface touch screen.

Pikasen is also equipped with shape detection technology to enable the removal of defectively shaped product. This means that the Pikasen can achieve the most complex sorts that have not been possible before in one pass.The Pikasen FMS2000-F has already proven to be a highly effective solution for our customers worldwide across various industries due to its application flexibility and excellent value.

 

Hygienic Round Top Removal (HRT) 3-A Filter

The Hygienic Round Top Removal (HRT) 3-A Filter, launched in December 2017 is a dust collector for sanitary applications. This circular bodied 3-A approved pulsejet filter features a convenient and efficient top hinged dome. With top entry there is no need to enter the dirty portion of the filter.

Top removal snap band filter bags require no tools for removal and can quickly be changed out. HRT filters work in low-capacity pneumatic conveying systems, such as vacuum loading of extruders or refilling minor/micro hoppers. Designed for low air volumes, the HRT can handle higher pressures than a square or rectangular unit.

 

The Agentis M007 Grain Dryer

M007 Grain Dryer, launched in March 2016 introduces a real time and in line solution for the control of grain moisture as it exits the dryer without the need for manual intervention.

Data from the inline M007 sensor is programmed to control the dryer based on real time moisture readings and can be fitted to existing dryers as well as new installations. Because the M007 Grain dryer system is fitted in the process line at the exit to the drier it removes the need for physical sampling and testing of the grains. The automated control process helps to reduce variation and result in closer to target final grain moisture. This in turn results in lower energy costs associated with the drying process and accurate determination of grain moisture to specific silos, which allows for more accurate temperature control in storage and reduced losses due to spoilage and mould growth.

 

The TMI Laser integration bagging lines

Traditionally, in the industrial bagging lines, the bags are identi?ed in two ways: either with marking (ink or thermal transfer), or with labeling (sewing directly to the bag or with an adhesive label). All these solutions are not without problems. Often the marking or labeling is done in dusty environments, in bags with irregular surfaces, and it is very common to have problems.

Generally, the labels are easily peeled off, or the bags are dirty with dust and this generates many dificulties for ink markings, apart from not being 100 percent clean technologies. In 2017 TMI launched the integration of the laser application into industrial bagging lines. This innovation creates increased reliability (labels do not detach); cost savings; and, no need for maintenance.

 

The Bühler PesaMill™

Atta is whole-wheat flour, originating from the Indian subcontinent, used to make most flatbreads, such as chapati, roti and puri. Most atta flour is milled on stone mills from hard wheat varieties. The annual production capacity of Atta-flour is approximately 70 million tons.

The Atta Process with PesaMill™ Production Process launched in August 2016 was developed for the efficient production of Atta flour. A seamless processing technique has been specially developed – with the PesaMill™ high-compression mill as the key component of the system. The process includes every link of the processing chain: from pre-cleaning and cleaning of the wheat to milling and packaging and quality control of the flour.

The circulation system with the PesaMill™ ensures the production of authentic Atta flour. Taste and mouth feeling are identical with Atta flour produced on traditional Chakki stone mills. The seamless integration and Atta-specific design of all components guarantees reliable functionality, the highest standards of product quality and food safety as well as maximum efficiency.

 

The Henry Simon Rollermil

The Henry Simon Rollermill, launched in April 2017 is a well-equilibrated combination of human touch and autonomous technology of the machines.

That is why, the sensors such as vibrating, thermal, speed, etc will be placed on the machine to digitise the operating conditions and environment conditions of machine. A smart touch panel will be used to improve the operability. The Operator can easily understand and operate. Various sensors will be used to digitize the operating conditions and the environment conditions surrounding the machine. It is to be made with a function to predict a failure.

 

The Sukup Double-Ended Stud Bolt

The Sukup Double-Ended Stud Bolt, released in 2017, is for use on laminated bin sheets and solves the potential problem of water weeping behind the stiffeners and into the bin causing spoiled grain, which can lead to significant financial losses and safety issues.

The patent pending design features a rubber-backed steel washer in the middle of the bolt that is set between the stiffener and sidewall sheets. This provides a tight seal directly to the outer sidewall sheet behind the stiffener, eliminating water infiltration between the sheets and into the grain.

The results of the will be announced at the Victam Exhibition being held in Bangkok, Thailand from March 27-29, 2018.

NEXT POSTS

Subscribe to our newsletter to get the latest news from industry

Newsletter Registration

DOWNLOAD OUR APP